Creating a realistic, glossy finish for your dollhouse tiles can elevate the overall look and details of your dollhouse or room box.
However, getting a smooth, glossy finish requires technique, and not every method is as easy to do. But, let’s go over a few ways I tried to figure out myself and from other crafters!
As an Amazon and Etsy associate, I earn a small commission from your purchase, with no extra charges for you.
Method 1: using Mod Podge to create glossy dollhouse tiles.
Mod Podge is a water-based sealer, glue, and finish used in crafting to adhere and coat surfaces. It comes in various finishes, like matte and gloss, and is easy to use.
I have used it myself so many times for all of my fairy houses, and it is quite durable as well.
Here are a few things to consider first if you are going to use it for mini tiles:
- Choose the Right Paper!
If you’re working with printable tiles, ensure the paper is thick enough (I use cardstock) to handle the application without warping. - Apply Mod Podge Carefully
- Tools: Use a soft-bristled paintbrush or foam applicator. Using your fingers can also work (see my video below)
- Apply thin, even coats of Gloss Mod Podge. Brush in one direction to minimize visible streaks. (again, I learned this the hard way, as seen in the video )
- Allow each layer to dry completely (around 15–20 minutes) before applying another coat. Multiple thin layers create a better finish than one thick layer.
- Tools: Use a soft-bristled paintbrush or foam applicator. Using your fingers can also work (see my video below)
Lessons from Experiments
In my YouTube video How to Make Dollhouse Tiles Look Glossy, I tried multiple methods to achieve the perfect glossy look with Mod Podge. Here’s a summary of what worked—and what didn’t:
- First Attempt
Smoothing Mod Podge Dimensional Magic directly onto the tiles created a thick, uneven layer. The result was overly raised and unrealistic.
On my second attempt though with the same products (this was off-camera though sorry), I had a much better result!
So personally, for my next project ( I will be “kitbashing” another kit), I think I’ll just use this product and method. And I will have better pictures 😉
Rest assured: I will write a new blog post when it’s finished lol.
Mod Podge Dimensional Magic 2 oz
Buy Now →- Second Attempt
I just used a wooden flat stick to spread the Mod Podge Gloss, which resulted in this tragedy haha!
- Third Attempt, UGH!
Placing a piece of paper over wet Mod Podge to smooth the surface didn’t work either—it left unwanted marks and texture.
- Final (Successful) Attempt
Rubbing Gloss Mod Podge onto the tiles with my fingers created a smoother, more uniform glossy effect.
While not perfect, this method minimized brush strokes and lines, making it a great low-cost solution for realistic tiles.
To Avoid: Using painter’s tape to create defined “grout lines” can backfire, as removing the tape may shred the paper or damage the surface!
Method 2: Use Nail Stickers and UV Resin to have shiny Tiles
Combining nail art stickers with UV resin is another fantastic method. Let’s see what you need:
Materials Needed
- Cardstock
- Nail Art Stickers: Available online or at local stores.
- UV Resin: For the glossy finish.
- UV Light Source: A UV lamp or sunlight for curing the resin.
- Silicone Mat: To work on a non-stick surface.
- Silicone Spatula or Applicator Tool: For spreading the resin.
- Needle Tool or Tweezers: For handling stickers.
Step-by-Step Guide
Here’s what is explained in the video above, step by step!
- Prepare the Tiles
Cut cardstock into small squares matching your desired tile size. For a 1:24 scale, ½ inch squares replicate a 12-inch tile in real life. Again, you can rescale the tile printable using Canva or Adobe. - Apply a Base Layer of Resin
Using a silicone spatula, spread a thin layer of UV resin onto the cardstock square. This helps the sticker adhere smoothly and prevents visible edges. - Place the Nail Art Sticker
Use a needle tool or tweezers to carefully peel and place the sticker onto the resin-coated tile.
Adjust the position until it’s perfectly centered. - Add a Top Layer of Resin
Slowly drip UV resin onto the tile, starting with small amounts. Spread it evenly to cover the sticker and the entire surface.
Ensure the resin reaches the edges without spilling over. Smooth out any dips for an even layer. - Cure the Resin
Place the tile under a UV light for 3 minutes on the top side.
Flip the tile and cure the underside for another 3 minutes to ensure thorough drying. - Inspect and Finalize
Check the tile for any imperfections. If needed, add another thin layer of resin and repeat the curing process.
In my opinion, this isn’t the easiest way (looks very fiddly) and neither the most affordable, but if you already have the materials and equipment, why not give it a try! 🙂
Tips for Success
Avoid Air Bubbles: Apply resin slowly and pop any bubbles with a toothpick or heat gun.
Use a Silicone Mat: Resin won’t stick to silicone, making cleanup easier.
Method 3: using plastic clear tape
In this terrific video by Tasmin Basset Art, she explains how she uses clear tape and other everyday materials to make her dollhouse tiles.
The project focuses on adding a beautiful tiled backsplash to a miniature kitchen. Here’s a quick overview of the process and techniques shared:
Supplies Needed:
- Cardboard (optional, for tile backing)
- Scissors
- Glue (PVA, glue stick, or hot glue)
- Clear tape
- Printable tile designs (available in the creator’s Etsy shop)
Her methods for realistic miniature tiles:
So first off, she just straight on uses the simplest method: printing out the tiles, cutting them out, and gluing them on the surface.
But then is where things get interesting:
- First, for a glossy ceramic look, she glues the tiles in place and covers them with clear tape. This simple step instantly gives the tiles a shiny, polished finish, just like real ceramic.
- Next, she takes it up a notch by cutting out individual tiles and backing them with cardboard or foam board.
After arranging them with small gaps, she fills the spaces with “grout”—even testing toothpaste as a quick substitute. The result is a textured, realistic tile layout.
- Finally, for a thinner, more subtle effect, she places glossy tiles on white paper, leaving gaps for a “grout” effect.
The contrast between the shiny tiles and the matte background creates a clean, realistic finish without adding bulk.
Each method is quick, simple, and perfect for giving your dollhouse tiles a professional touch!
Method 4: use photo paper for that shine!
And finally, a much-used method to create miniature tiles, is using photo paper.
Again, start by designing or selecting a tile pattern, rescale it to fit your dollhouse, and print it onto glossy photo paper.
After the print dries, use a scoring board or stylus to carefully score along the grout lines, creating texture and depth that mimic real tile joints.
For added durability, you can seal the surface with a clear spray coating.
Glue the sheet onto your dollhouse floor, ensuring it lays flat, and use heavy objects to prevent warping as it dries.
This method not only looks professional but also allows flexibility to change the design easily if needed.
Check out my ultimate guide on how to create dollhouse printables DIY!
My Final Conclusion
While I’m sure that there are probably more methods than these to make your dollhouse tiles look glossy and real, these look like they are the most common ways.
Do you have anything to add to this or have any questions? Feel free to ask them in the comment section below!
I wish you happy crafting!
Kind regards,
Lizzy
Hi everyone!
My name is Lizzy, and I am an amateur miniaturist obsessed with everything in the dollhouse and miniature world, ever since I was a teenager.
So far, I have created 2 dollhouse projects, a backyard shed and a miniature treehouse, tons of DIY dollhouse kits, and “hacked” some.
I also created a fairy garden, and lots of small and simple miniature projects on my YouTube channel. (mostly made from trash or everyday items).
I love to write as well about all things happening in the miniature world, hence the reason why I created this blog!
I wish you happy reading and crafting!
Lizzy