In this tutorial, I'll show you two different ways to make dollhouse curtains and window blinds using simple, everyday materials.
The first method creates a miniature window blind with horizontal folds and pull cords, perfect for adding a more structured look to your dollhouse windows.
The second method is a softer, more delicate option: miniature lace curtains with ribbon tiebacks. These would look lovely in a Victorian dollhouse, a cozy cottage, or a shabby chic miniature room.
Both projects are inexpensive, and you can easily adapt the colors, fabrics, and measurements to suit your own dollhouse windows.
Looking for 4 more ways to create dollhouse curtains, check out this tutorial!
Let's start with the first method!
Method 1: How to Make Miniature Paper Window Blinds

Materials Needed to Make Miniature Pleated Window Blinds
- Decorative paper or lightweight cardstock (120–160 gsm) – Choose paper that is firm enough to hold sharp accordion folds but flexible enough to fold into a compact stack..
- Ruler and pencil – For measuring and marking the paper.
- Scissors or craft knife – For cutting the paper to size.
- Embroidery thread or thin cotton cord – To thread through the pleats and create the pull cords.
- Needle or small hole-punching tool – To make holes along both sides of the folded paper.
- PVA craft Glue – To secure the paper and attach the finished blind. Apply sparingly
- Double-sided tape or clear adhesive tape – To secure the cords and folded paper at the top.
- Three narrow strips of cardboard or chipboard – To reinforce the top of the blind and create a sturdy mounting section.
Step 1: Cut and Fold the Paper
Start with a rectangular strip of decorative and strong paper. Here, we're using white paper with a pretty floral design along the bottom.

Choose a width that fits your dollhouse window, leaving enough length to create the folds.
Draw small, evenly spaced pencil marks along both long edges. These will help you keep the folds straight and consistent.

Next, fold the paper back and forth along the marks, creating an accordion or pleated pattern.

Keep folding until the entire strip is pleated. The floral design will remain visible along the bottom of the miniature blind.
Step 2: Make the Holes for the Pull Cords
Gather the pleated paper together into a compact stack, making sure the edges line up.
Mark two points near the opposite ends of the folded stack, keeping them an equal distance from the edges.

Using a small hole punch, carefully make a hole through the folded layers at each marked point.

