This is one of those projects that looks way more complicated than it actually is.
It’s mostly straight cuts, basic assembly, and a bit of patience while the glue dries. I made this little dollhouse table with two matching chairs using regular popsicle sticks and a craft knife, no fancy tools needed.
It’s perfect for a dollhouse kitchen, garden scene, café setup, or even an outdoor patio. Let's jump straight in!
PS: I am doing my best to explain each step with words and as many pictures as possible, but it is sometimes harder for me to do than just show a one-time video only with instructions on my YouTube channel. Please understand.
List of Materials
What you need for this project:
- Popsicle sticks (regular size, thinnest ones you can find for the legs)
- Craft knife or hobby knife
- Metal ruler
- Cutting mat
- Wood glue or tacky glue
- Sandpaper or sanding sponge
- Acrylic paint (black or dark grey for the frames)
- Brown acrylic paint or wood stain for the tabletop and seats
- Small paintbrush
Dimensions / Parts
🎥 Watch this Short on
YouTube
Table
- Tabletop slats (base): 0.5 × 5 cm
- Tabletop frame (sides): 0.5 × 4.7 cm
- Table legs: 0.5 × 4.6 cm
Chairs
- Chair frame / legs: 3 cm
- Seat slats: 3.5 × 0.5 cm
- Seat frame: 7 cm length × 3.5 cm depth
- Back support (horizontal): 3.3 cm
Step-by-step tutorial.
Just follow the instructions step by step, and if you have any more questions, feel free to ask down below in the comments section!
First, we'll do the miniature table.
- Step 1: Cut All Your Pieces First
Start by cutting your popsicle sticks into strips using a ruler and craft knife or box cutter (depending on the thickness of your sticks).
Take your time here; straight, consistent cuts make everything else easier later.
Once everything is cut, lightly sand the edges. This removes splinters and helps the pieces sit flush when glued.
- Step 2: Build the Tabletop
Lay the tabletop slats (0.5 × 5 cm) next to each other until you have the width you like. Glue them together side by side and let this dry completely.
Once dry, glue the side frame pieces (0.5 × 4.7 cm) along the left and right edges of the tabletop to give it a framed look and extra strength.